Untitled Document


TVMPA Raises $1380 for the Ron Ginner Fund

Over the past several months TVMPA has raffled a custom carved Special Edition Marlin 1895 G Guide Gun 45-70. We had over 150 people purchase tickets and raised over $1,350 for the Ron Ginner Apprenticeship Fund. The proceeds will go to purchase code books for apprentices that work for member companies. For those apprentices that do not work for member companies we will offer code books at 50% of the cost.

The winner of the rifle was Scott Ferguson of Master Plumbing. We want to thank everyone for their contributions to this important fund!!

TVMPA Fundraising Rifle Raffle

TVMPA is conducting a Fundraiser for the Ron Ginner Apprenticeship Fund to help First Year Apprentices with code book costs!  Help out by buying a raffle ticket for this custom carved Special Edition Marlin 1895 G Guide Gun 45-70. 

Click here for a flyer!


TVMPA worked over a two year period to promote and get adopted an Idaho State Plumbing Code, which simplifies the codes and tailors them to Idaho needs. We currently are offering these codes for sale at a reduced cost to members.

TVMPA provides critical training to our members and non-members and is currently offering a FREE training on the Idaho State Plumbing Code and the significant changes.

TVMPA has a dedicated fund to assist plumbers to attend classes at the College of Western Idaho.

TVMPA provides a vehicle to network with other plumbing companies, to compare notes and a forum to share ideas and problems.

TVMPA is committed to educating others in the building industry on plumbing issues.

TVMPA has recently contracted with staff and now has an office to better serve our members.

TVMPA is working on other strategic goals to become even more effective in our service to you!

TVMPA is working on continuing education offerings to meet future continuing education requirements.

TVMPA is the only organization that is dedicated specifically to the plumbing trade in Idaho.

Why You Should Hire A Licensed Master Plumber

We take a lot of the things for granted in today’s society.
We turn on the faucet and clean drinking water comes out. We flush the toilet and the waste disappears. The plumbing that makes all of this possible requires a highly skilled professional, a Licensed Master Plumber.

From hooking up gas connections to keeping sewage from contaminating drinking water, a licensed plumber is needed. That’s why a licensed plumber MUST have years of experience and pass rigorous tests before they are approved for a license. In Idaho, licenses are issued from the Idaho Division of Building Safety (dbs.idaho.gov) after rigorous testing and continuing education is completed.

Too often, landlords and building managers create health hazards when they use unlicensed people to do the work of a licensed plumber. When getting price quotes, remember that the least expensive quote will not always cost you the least amount. Shoddy, unlicensed plumbing can come with a high price; leaks that ruin floors and ceilings, life threatening illnesses from polluted water, even destruction and death from explosions caused by improper gas connections.

Unlicensed people can charge less because they might not have the proper insurances and may not file the necessary paperwork with the Department of Buildings. If something goes wrong, you will be the one left with the problem. In addition, building owners can face fines when work is not properly permitted and completed by a licensed plumber.

The next time you need a plumber, remember to ask for their license. Don’t take a chance with your health, your property or your life.

Boiler Not Properly ConnectedImproperly Maintained Valve
Boiler Not Properly Connected   Improperly Maintained Valve

Tips on choosing the right plumbing contractor for you

Selecting the right plumbing company can take the stress and worry out of your repair needs, whether they are large or small. Proper plumbing design is a science. Providing adequate water pressure and keeping various toxins out of your water lines are only two of many concerns a plumber must address when designing a system.

What To Look For

  • Ask to see the state license – All plumbers, including sub-contractors and journeymen, are required to be licensed by the state.
  • Check proof of insurance – For your own protection, check proof of both workman’s compensation and general liability.
  • Business stability – Find out how long the company has been in business and how long it has been at its present location.
  • Building codes – In certain municipalities you’ll need to see that all
    building codes are met.
  • Price – When looking for a reliable plumbing company, you cannot simply rely on hourly rates. Plumbing companies’ billing systems vary. While some will charge according to “time and material”, other companies will charge a “flat rate”. When you get an estimate from a company, be sure to ask what will be provided for the price quoted. Recognize that there are several variables in developing the price.
    These include:

    -Time that it takes to complete the installation or
    perform the repair.

    -Quality of the fixtures.

    -Number of fixtures.

    Remember, the company quoting a low rate may not necessarily be the right company for you. Some plumbing companies may offer low hourly rates, but then charge additional “equipment fees” for certain tools needed on the job. Ask if there are any additional charges for equipment, truck or trip costs. Basically, when evaluating quotes, be sure you are comparing apples to apples.

    You may also need to consider that most companies charge a higher rate for overtime, weekends, holidays and emergency calls. These charges vary from company to company.

    Also ask about the types of fixtures and pipes that are to be installed. Make sure you are comparing similar quality products when seeking estimates. It is not uncommon for companies to require a
    deposit for special orders on fixtures.

  • If you are purchasing products yourself to be installed by a plumber, check with your plumber first. Many will not install customer-purchased products. If the plumber will install customer-purchased products, check the quality of the product. Look for an approval stamp, such as the Uniform Plumbing Code stamp (UPC). The National Sanitation Foundation (NSF) also places stamps on products. These stamps are similar to the familiar UL approval on electronic products. You should also make sure the product is right for your building and meets all codes. Remember, if the product fails and the problem is not with the installation, then you may have to pay for the removal of the item.
    It is common to receive a warranty on the services provided. This may include 30 days on stoppage and as many as 90 days on installation. Be aware that material may have a longer warranty than labor. For example, a part may be under a warranty for five years and the labor for only one.
    Check for membership in trade organizations, such as the local chapter of The National Association of Plumbing-Heating-Cooling Contractors and the Association of Master Plumbers. Companies who participate in these organizations are more likely to keep up-to-date on new regulations and codes.

Performing Your Own Work

  • What is a permit? A permit grants the holder authorization to perform specific construction and/or installation work. Permits are assigned a unique document number which is required when requesting inspections and approval of the work.
  • The person applying for the permit must be the owner of the property at the time of the application. You (the owner) must personally perform all of the work. The owner is not required to be licensed for this work. This applies to primary or secondary residences only. PLUMBING PERMITTING ONLY – If you own the residence, but lease or rent the house to another, you must hire a plumbing contractor to purchase the permit and perform the plumbing work.
  • Inspectors are not permitted to design a system for you but they will be happy to answer questions regarding safety standards and national codes. NOTE: Only qualified contractors and inspectors have the training and experience to give proper advice on safety standards and national codes.
  • An inspector may, during reasonable business hours, re-inspect or test any installation. If at any time the inspector finds violations of safety standards or national codes, you will be notified of the corrections to be made.

Hiring a Professional

  • Idaho statutes require that any individual or company performing Electrical, HVAC or Plumbing work in the state obtain the required licenses.
  • If you, as the owner, choose to hire a contractor, you must verify that the contractor is properly licensed with the Division of Building Safety. Contractors are required to obtain permits in their name. Contractors may not legally perform work under a property owner (homeowner’s) permit.

Plumbing History

The invention of the flush toilet is widely attributed to London plumber Thomas Crapper, who patented a U-bend siphoning system for flushing the pan in the late 19th century, and who also installed
toilets for Queen Victoria.

China has challenged Britain’s claims to have invented the water closet down the pan with the discovery of a 2,000-year-old toilet complete with running water, a stone seat and a comfortable armrest.
Archaeologists found the antique latrine in the tomb of a king of the Western Han Dynasty (206 BC to 24 AD), who believed his soul would need to enjoy human life after death, the official Xinhua news agency said on Wednesday. Among other inventions claimed by China are toilet paper, fireworks, gunpowder, the compass, paper money, kites, printing and the clock.

For more history on plumbing check out www.theplumber.com


Treasure Valley Master Plumbers Association
PO Box 8224, Boise, ID 83707 | Phone: 208-947-8096 | Fax: 208-321-4819 |